PE-AL-PE Pipes For Hot & Cold water supply
Jindal Multi-Layer Composite Pipes (PE-AL-PE) combine the advantages of metal and plastic pipes and eliminate the disadvantages of both materials at the same time. They are easy to bend & install directly on girder or inside wall and cement concrete. Jindal MLC Pipes and fittings are manufactured with the latest german technology at our state of the art facility in Dehradun, Uttarakhand, India.
EZ-Fit Compression Fittings
It is essential that all Jindal MLC Pipes are installed using EZ Fit compression fittings. EZ Fittings combine the positive feature of high reliability wiht a simple installation technique that does not require any special tools. Click to learn more
Installation Guide
Learn the proper way to install Jindal MLC Pipes by watching a quick video linked below. When installed correctly there is zero chance of leakages and you will have a piping system that will last you over 50 years.
RAW MATERIALS
At Jindal MLC Pipes we use the highest quality raw material available on the market, importing from countries like Belgium & Israel.
-
Polyethylene or PE is a polymer consisting of long chains of the monomer ethylene. It is created through the polymerization of ethene and is classified into different types based on Density. High density polyethylene or HDPE is used to manufacture Jindal MLC Pipes. It has a low degree of branching and thus stronger inter-molecular forces and tensile strength.
-
Aluminium is a soft, lightweight, non-toxic and malleable metal with appearance ranging from silvery to dull gray depending on surface roughness. Aluminium alloys have yield strengths ranging from 200mpa to 600mpa. For Jindal MLC Pipes, a specialised grade of ALuminium is used which is manufactured specifically for these pipes and have the right balance of strength and flexibility as required for bending applications.
-
Nylon is one of the most widely used plastics because of its extreme strength, wear resistance and self lubricating properties. Nylons are also known to have high impact resistance, high operating temperature and are light weight. Nylon is commonly used as a replacement for bronze, brass, aluminium, steel and other metals. The glass reinforcement gives the material higher compressive strength and rigidity, as well as imporved frictional characteristics.
