PE-AL-PE Pipes for Inert GAS supply

 
 

The aluminum layer allows Jindal MLC pipes to withstand high working pressure and prevent gases from permeating into the pipe. They are easily bent, which makes the use of numerous fittings unnecessary. Jindal MLC pipes are safe and reliable choice for compressed air, gas and oxygen supply.

  • Jindal MLC Pipes combine the advantages of metal and plastic pipes and eliminate the disadvantages of both materials at the same time. The aluminium core is absolutely diffusion tight and reliably prevents oxygen or gases from permeating into the pipe. It compensates and reduces snap-back forces and heat expansion with changes in temperature. Jindal MLC Pipes and fittings are manufactured with the latest german technology at our state of the art facility in Dehradun, Uttarakhand, India

 

EZ-Fit compression fittings

It is essential that all Jindal MLC Pipes are installed using EZ Fit compression fittings. EZ Fittings combine the positive feature of high reliability wiht a simple installation technique that does not require any special tools. Click to learn more

 

Installation Guide

Learn the proper way to install Jindal MLC Pipes by watching a quick video linked below. When installed correctly there is zero chance of leakages and you will have a piping system that will last you over 50 years.

At Jindal MLC Pipes we regularly subject our products to inspection and long-term testing. Our in house Laboratory keeps material specifications and long-term properties under constant scrutiny. This provides the necessary foundation for product enhancements performed within our Research & Development department.

As a result you will always be supplied with the highest possible quality and latest technology in the plumbing and piping system. Our range of plastic fittings is specifically designed for Indian plumbing techniques.

 

 

RAW MATERIALS

At Jindal MLC Pipes we use the highest quality raw material available on the market, importing from countries like Belgium & Israel.

  • Polyethylene or PE is a polymer consisting of long chains of the monomer ethylene. It is created through the polymerization of ethene and is classified into different types based on Density. High density polyethylene or HDPE is used to manufacture Jindal MLC Pipes. It has a low degree of branching and thus stronger inter-molecular forces and tensile strength.

  • Aluminium is a soft, lightweight, non-toxic and malleable metal with appearance ranging from silvery to dull gray depending on surface roughness. Aluminium alloys have yield strengths ranging from 200mpa to 600mpa. For Jindal MLC Pipes, a specialised grade of ALuminium is used which is manufactured specifically for these pipes and have the right balance of strength and flexibility as required for bending applications.

  • Nylon is one of the most widely used plastics because of its extreme strength, wear resistance and self lubricating properties. Nylons are also known to have high impact resistance, high operating temperature and are light weight. Nylon is commonly used as a replacement for bronze, brass, aluminium, steel and other metals. The glass reinforcement gives the material higher compressive strength and rigidity, as well as imporved frictional characteristics.